UConnect Wireless Clientless Authentication

Manual UConnect configuration for Health Sciences Clinical Users

(Windows laptops running Odyssey clients)

The University Hospital uses a separate wireless network than the rest of campus. MOST Hospital users will not need to use the new UConnect network, as they are setup to use the Hospital wireless network: UUHSC. If you will need to use UConnect, please follow the instructions below.

  1. Open Odyssey
    1

  2. Configuration => Profiles
    2

  3. Add a profile
    3

  1. Name this “UConnect Profile” and delete the srvr\ from before your uNID
    4

  2. Click the “Authentication” Tab
    5

  3. Click “Add…” and select “EAP-PEAP”
    6

  4. Click OK, then highlight EAP-TLS and click “Remove” then click OK

  1. From the menu on the left select Configuration => Networks
    7

 

  1. Select “Add ...”
    8

  2. Click "Scan" button
  3. Select UConnect from pop-up dialog box

    In the Network Properties screen,
  • Select WPA2
  • Select AES
  • Use the new profile you created, “UConnect Profile”
  • Click OK
    9

    12. Select WiFi from the Menu on the left, then select “UConnect” from the networks drop down list
    10

13. When the security screen pops up, check the box for “Add this trusted server to the database” then click on “Yes”
12

NOTE: There are 2 Servers, you may see this screen again for the second one. Click “Add this trusted server to the database” again and click yes. You will not need to do this more than twice.

It may take up to a minute before you are logged onto the UConnect network.

14. The “Status” in Odyssey will change to “open and authenticated” when you are done connecting and the icon in your task bar will change to indicate that you are connected.

If you have any problems or questions, please call the HSC Help Desk at (801) 587-6000.